|
Neodym PowerKnowz
Combustible gas / CO detector with relay
|
|
MOS (tin dioxide) sensor
HCMOS microcontroller
Hydrogen, methane, propane & CO versions 0-50%
LEL measurement (0-450 ppm CO)
50/100 ppm logical resolution (2 ppm CO)
30 seconds start-up time
4 secs. T90 response time (60 secs. CO)
10 secs. T10 recovery time (120 secs. CO)
Normal, Warning, Alarm & Error states
Table look-up (software) linearization
Bi-color LED status indicator
Optional NO or NC dry relay
Manual reset or auto-resetting operation
Optional 0-to-5V proportional output (8 bit)
Optional binary operation (TTL output)
Optional alarm beeper
PK-Port™ compatible digital communications
User-settable alarm/warning via PK-Port™
Digital FLASH-based calibration
Each device factory pre-calibrated
Field re-programmable firmware
-40 to +80 Celsius active compensation
Sensor & temperature error detection
5VDC @ 80mA (400 mW) operation (Option "I1")
Optional 7-40VDC input power version (Option "I2")
Optional 7-60VDC input power version (Option "I3")
|
- PESCO carries a wide range of battery room safety products conforming to NFPA, ASTM and OSHA specifications.
If you wish to place an order or for additional information, please call the number below.
 |
|
Copyright © 2004; all rights reserved.
PESCO Power and Environmental Services Company
425 Industrial Drive, PO Box 1393, North Wales, PA 19454
1-800-789-6442 FAX 215-661-1878 Email: info@pescoproducts.com
site by nextstep4u.com
|
|
|
